|
About Us
Fusion Concepts, Inc. provides a full range of technical service, support and spare parts for Pfankuch equipment. |
|
Support for VS 6.88 and previous controllers is discontinued  |
|
We have just been informed by Pfankuch that they will no longer support controller generations prior to the VS2000. What does this mean for you?
1. There are a limited # of VS 6.88 controllers in stock. If you want purchase one for a spare, please do so quickly.
2. A replacement version has been designed and will be available moving forward. It is designated as the VS 10.06GM. It is fully backward compatible EXCEPT it uses different emitter and receivers. We anticipate the price will be the same as the VS 6.88 has been.
3. There are a limited number of emitters (002171F) and receivers (002172F) available. If you want to purchase spares, please do so quickly. NOTE: once these are exhausted, should you need to replace an emitter or receiver you will also have to replace the controller.
4. We are often able to repair controllers in house. We will continue to offer this service as long as we continue to have required components available. We will no longer be able to forward them to Pfankuch for factory service if the failure exceeds our local ability to repair it. Contact us for more info. |
| Upgrade from VS2000 controller to VS2002 |
|
For those of you with VS2000 controlled feeders there is no action require. Keep in mind that we offer an upgrade to the newer VS2002 controller for most feeders originally equipped with a VS2000. |
|
